Comfort 516 Set for single-leaf swing gates up to 2.5 m, 868 MHz bi.linked

Set for single-leaf swing gates up to 2.5 m: 24 V DC motor, 1,000 N, 2.0 cm/s, 120°.
SKU
102303
4062434010730
Comfort 516 Set for single-leaf swing gates up to 2.5 m, 868 MHz bi.linked

Scope of delivery:

  • Motor unit, pre-wired 6x0.75 mm² 1,500 mm
  • External control Control x.52
  • Digital 921 Module receiver, 868 MHz bi.linked
  • Digital 564 mini hand transmitter 4-channel, 868 MHz bi.linked
  • Gate and angle bracket
  • Installation material

Operator – Features:

  • Current-dependent obstacle detection - no active closing edge protection necessary
  • DC motor: soft start and stop are gentle on the door, separately adjustable opening and closing speeds enable fast opening and standard-compliant closing
  • End position adjustment directly at the control
  • Reference point technique
  • Very quiet mechanics
  • All mechanical parts protected against weather influences
  • Sturdy and UV-resistant plastic housing
  • Gate and pillar angle for easy motor mounting
  • Lockable unlocking device

Control – Functions:

  • Power-saving technology
  • Soft start/soft stop/soft run
  • Electronic anti-deferral device
  • Blocking protection
  • Runtime limit
  • Automatic feed function (can only be used in conjunction with a light barrier)
  • Gate open time and prewarning time separately programmable
  • Lighting duration programmable and switchable by radio
  • Automatic switch-off OPEN and CLOSE separately programmable
  • Partial opening programmable
  • Active leaf function programmable for 2-leaf gates
  • Running speed OPEN and CLOSE separately programmable
  • Soft run position OPEN and CLOSE separately programmable
  • Soft run speed OPEN and CLOSE separately programmable
  • Relay output programmable: signal light, door position OPEN or CLOSED, wipe pulse (1 s), fault, lighting
  • Cycle counter
  • Maintenance interval programmable
  • Error signaling with error memory
  • Multi-level reset function (control, safety, radio, etc.)

Control – Operation:

  • Marantec EOS programming
  • Programming and status message via LC display
  • Programming and diagnostics possible via optional external handheld programmer

Control – Structure and connection:

  • Pluggable radio receiver
  • Connection (conventional) for pushbutton
  • Connection (conventional) for 2-wire or 4-wire photoelectric sensor OPEN and CLOSED
  • Connection (conventional) for holding circuit
  • Connection (conventional) for 8.2 kOhm contact strip OPEN and CLOSED
  • Connection (conventional) for 24 V-DC signal lamp
  • Connection (conventional) for electric lock 24 V-DC
  • Connection (MS bus) for handheld programmer and expansion modules
  • Connection for battery backup
  • Output 24 V-DC, max. 50 mA
Comfort 516
Product descriptive data
Connection type Conventional
Continuous sound pressure level (max.) [dB(A)] 70
End position system Reference point technique
Protection class IP44
Overload protection Shutdown via current consumption
Application area
Width gate wing (max.) [m] 2.5
Weight of gate leaf (max.) [kg] 200
Height gate wing (max.) [m] 2
Gradient (max.) [%] 0
E dimension (min./max.) [mm] 0/260
Temperature (min./max.) [°C] -20/60
Performance data
Operating mode (duty cycle) S2 - 5 min
Running speed (max.) [cm/s] 2
Opening angle (max.) [°] 120
Push and pull force (max.) [N] 1,000
Electrical data
Operating voltage [V] 24 V-DC
Operating voltage type Direct current
Motor voltage [V] 24 V-DC
Rated current [A] 1.7
Dimensions and weights
Weight [kg] 5.4
Movement stroke (max.) [mm] 413.5
Dimensions (WxHxDmin/Tmax) [mm] 122x198x723/1136.5
Control x.52
Product descriptive data
Protection class IP65
Protection class I
Application area
Temperature (min./max.) [°C] -20/60
Electrical data
On-site supply 230 V/1~/50 Hz 230 V/1~/60 Hz
Power consumption [VA/W/kW] 0.4 kW
Power consumption in standby [VA/W/kW] 3.2 W
Motor voltage [V] 24 V-DC
Rated current [A] 1.7
Control voltage [V] 24 V-DC
Dimensions and weights
Dimensions (WxHxD) [mm] 120x240x100
Marantec Marienfeld GmbH & Co. KG
Remser Brook 11
33428 Marienfeld

 

For questions to the manufacturer, please use this Contact form.

Bracket for enlarging dimension A on the gate pillar
Special 516 connection cable 6x0.75 mm² with cable cover, 10 m
Connection cable 8x0.75 mm², 10 m
Special 505 gate and post bracket for an e-dimension of 150 to 200 mm
Special 506 Mounting plate for door leaves with narrow frame
Pillar angle 110/130 to increase dimension A on the gate pillar
Pillar angle 115/215 Can be shortened in 20 mm increments
Special 402 Electric lock 24 V-DC, pillar lock
Special 403 Electric lock 24 V-DC, floor lock
Special 404 Overrun hanger for bolting on
Special 407 Overrun hanger for setting in concrete
Special 408 Overrun hanger for setting in concrete
Spindeleinheit Comfort 516
Zubehörbeutel Comfort 515/515 L/516/516 L
Steuerungseinheit Control x.52
Leergehäuse Control x.52/x.82
Motor-Aggregat Comfort 516
Gehäuse Antrieb Comfort 516/516 L
Steuerung Control x.52

    Subscription for product:

    Comfort 516, 516 L swing gate operators / Product SKU: P6915
    Back to grouped product
    Loading...