Main image
Click to view image in fullscreen
![]()
MDF 30-42-12 KU AWG 40.0 mm IP54 - CS 320 400 V/3~ - 5.0 m - Express delivery
-
Speditionsartikel
Set for rolling doors up to max. 541 kg: 400 V-AC motor, 420 Nm, 12 rpm, AWG, with load contactor control CS 320.
SKU
186298
4062434014493
3.00
Prices are only visible after login.
MDF 30-42-12 KU AWG 40.0 mm IP54 - CS 320 400 V/3~ - 5.0 m - Express delivery
Scope of delivery:
- Operator MDF 30-42-12 KU 400 V/3~ AWG 40.0 mm
- Control unit CS 320 400 V/3~ in CS standard housing with 3-series push button and LC display, connection cable with CEE plug 5-pin red
- Cable set with connection terminals and cable bushings in control unit and operator, 5,000 mm
Operator – Features:
- Rolled worm shaft
- Emergency operation via emergency hand crank "KU" (1-sided) or "KU-KU" (2-sided up to 420 Nm & 12 rpm) or emergency hand chain "KE
- Easy conversion from crank to chain
- Integrated safety catch, independent of position and speed, maintenance- and wear-free, integrated cushioning
- Pendulum foot support
- Supply: 230/400 V/3~/50 Hz
- Thermal protection in the motor winding
- For gate systems with above-average circuits, a operator with an increased motor duty cycle (HD) should be selected
- Pluggable connectors
- End position setting via electronic absolute encoder (AWG) or mechanical limit switches (MEC)
- Version with external control, can be combined with extensive control program. Supply: 230/400 V/3~, frequency: 50/60 Hz and control voltage: 24 V-DC
- When the output speed is increased (operation with frequency converter), the output torque is reduced. In this case, the following applies: An increase of the output speed by 10 % causes a reduction of the output torque by 5 %.
- Special variants such as other voltages and frequencies, different output speeds, higher degrees of protection and hollow shaft Ø on request
- ATEX version available (see chapter "Operators for hazardous areas")
- For temperature ranges below -20 °C there is suitable oil and electric heating on request
MDF 30-42-12 KU
Product descriptive data
Connection type
Pluggable
Brake control
Internally controlled
Continuous sound pressure level (max.) [dB(A)]
70
End position system
Absolute encoder
Safety catch integrated
Yes
Foot attachment type
Pendulum foot support
Gearbox
Rolled worm shaft Double bearing worm shaft
Emergency operation
Emergency hand crank (KU)
Protection class
IP54
Overload protection
Thermal protection 140 °C
Brake type
Gr. 1/1 Nm
Application area
Operation with CS 320 FU (frequency converter 400 V/3~)
2.2 kW
Temperature (min./max.) [°C]
-20/60
Operation with CS 320 FU (frequency converter 230 V/1~)
–
Performance data
Output torque [Nm]
420
Output speed [1/min]
12
Torque of the safety catch (max.) [Nm]
2,680
Output revolutions (max.)**
18
Cycles per hour (max.)*
20
Motor power [kW]
1.1
Electrical data
Operating voltage [V]
400 V/3~
Operating voltage type
Three-phase current
Power factor cos phi
0.58
Nominal frequency [Hz]
50
Control voltage [V]
24 V-DC
Rated current in star connection [A]
5.10
Rated current in delta connection [A]
8.80
On-site fuse protection (mains operation 230 V/3~) [A]
16
On-site fuse protection (mains operation 400 V/3~) [A]
16
On-site fuse protection (FI operation 400V/3~) [A]
16
Dimensions and weights
Weight [kg]
27
Dimension A [mm]
287
Dimension A1 [mm]
145
Dimension B [mm]
122
Dimension C [mm]
507
Dimension C1 [mm]
130
Shaft support [mm]
40
Marantec Marienfeld GmbH & Co. KG
Remser Brook 11
33428 Marienfeld
Remser Brook 11
33428 Marienfeld
For questions to the manufacturer, please use this Contact form.
