STAI 1-8-45 FU-I HD

STAI operators are robust commercial door operators with an overhead track. They offer the optimal operator solution for spring-balanced sectional doors with low lintel fittings or lack of lateral space for installation. Due to their robust design, they are equally well suited for use in underground garages. Gates with a maximum height of 4,500 mm can be automated. The gearmotors are based on the proven STA operators. All STAI series operators operate on the basis of an external control system; special solutions for individual customer requirements can be implemented flexibly and quickly at any time..
SKU
P13182
Available in many variants
STAI 1-8-45 FU-I HD

Features:

  • Die-cast aluminum housing, rolled worm shaft and double worm shaft bearings
  • Emergency operation via unlocking mechanism on the guide carriage of the operator rail
  • Supply: 230/400 V/3~/50 Hz
  • Thermal protection in the motor winding
  • For gate systems with above-average circuits, a operator with an increased motor duty cycle (HD) should be selected
  • Pluggable connectors
  • End position setting via electronic absolute encoder (AWG) or mechanical limit switches (MEC)
  • Version with external control, can be combined with extensive control program. Supply: 230/400 V/3~, frequency: 50/60 Hz and control voltage: 24 V-DC
  • When the output speed is increased (operation with frequency converter), the output torque is reduced. In this case, the following applies: An increase of the output speed by 10 % causes a reduction of the output torque by 5 %.
  • The soft-start and soft-stop technology ensures a longer service life of the door system, as the door mechanism is subjected to less stress. This reduces repair costs.
  • Special variants such as further voltages and frequencies, output speeds and higher degrees of protection on request
  • Mounting and installation components available
  • For temperature ranges below -20 °C there is suitable oil and electric heating on request
STAI 1-8-45 FU-I HD
Product descriptive data
Connection type Pluggable
Brake control Without brake
Continuous sound pressure level (max.) [dB(A)] 70
End position system Absolute encoder Mechanical limit switches
Safety catch integrated No
Gearbox Rolled worm shaft Double bearing worm shaft
Emergency operation Without emergency operation
Protection class IP54
Control type External
Overload protection Thermal protection 140 °C
Brake type Without brake
Application area
Temperature (min./max.) [°C] -20/60
Operation with CS 320 FU (frequency converter 230 V/1~) 0,75 kW
Door area at 50 Hz (max.) [m²] 30
Door area at 87 Hz (max.) [m²] 20
Performance data
Output torque at 50 Hz [Nm] 80
Output torque at 87 Hz [Nm] 56
Output speed at 50 Hz [1/min] 45
Output speed at 87 Hz [1/min] 78
Holding torque (min.) [Nm] 600
Running speed (max.) [cm/s] 15
Output revolutions (max.)** 40
Cycles per hour (max.)* 25
Motor power [kW] 0.55
Electrical data
Operating voltage [V] 230 V/3~
Operating voltage type Three-phase current
Nominal frequency [Hz] 50
Control voltage [V] 24 V-DC
Rated current in delta connection [A] 3.00
On-site fuse protection (frequency converter operation 230V/1~) [A] 16
Dimensions and weights
Weight [kg] 18
Dimension A [mm] 245
Dimension A1 [mm] 55
Dimension B [mm] 136
Dimension C [mm] 336
Dimension C1 [mm] 55
Shaft support [mm] 25.4

One cycle corresponds to two travels (opening and closing) of the gate. The values given refer to 10 revolutions of the output shaft per travel and assume an even distribution

Marantec Marienfeld GmbH & Co. KG
Remser Brook 11
33428 Marienfeld

 

For questions to the manufacturer, please use this Contact form.

Subscription for product:

Loading...